224 Royalty-Free Audio Tracks for "Back And Forth"

Old epson printer has this ink-check procedure if one of cartridges is missing. The head goes back and forth while integrated circuits inside are testing cartridge response. I couldn't let this one go.

H2n zoom placed underneath a feeding place for small birds as they go back and forth between the feeder and trees close by. Towards the end a tractor drives in the distance and a cat walks by making the birds fly away at once.

The sound of scrubbing an am radio back and forth across the spectrum. There are bits and pieces of stations picked up, but it's mostly interference. Recorded using an old analogue radio, connected to a zoom h1 handy recorder.

This is the sound my wooden chair makes when i go back and forth! this sound is very useful and it can be used in several occasions. For example this could be the sound an old wooden boat cruising on the sea. Use your imagination! enjoy!.

This is a chord loop at 74 bpm it bounces back and forth between b minor and a major (key of a major). This sound was recorded using propellerhead reason 7. 1 via a motu 828 mkiii on 7/12/2014 the synth used is my korg polysix. Enjoy.

A violin bow scraped back and forth on various parts of the neck of my acoustic bass with a little bit of reverb and compression applied, several samples to choose from, and a bit at the end that sounds kind of like a big monster snarling. Recorded with a blue yeti blackout.

I heard these owls outside my window this evening. I live next to a large field and it attracts birds of prey frequently. I managed to capture them conversing back and forth. Unfortunately, the neighbors dog had to chime in. But, even that sounds kind of neat with the natural reverb of the open space.

This is a narrated soundwalk on a hill. It involves wind blowing leaves and trees, and a very weird bird sound that i can not identify. I walked back and forth between the area where this sound was recorded. There's always the sound of my walking and miscellaneous sounds i may not have mentioned in the minute.

The sound of the old rusty metal bending back and forth. Between the duration of 13 to 15 seconds, you can hear a voice that says "okay, i gotta close" and. It was recorded in an outing on january 21st, 2023 at fortwhyte alive a recreation centre in winnipeg.

This is a recording i made of a handle-less serrated knife rubbing against another of the same type, back and forth. I then cut out the lighter points to leave the heavy tones, then i gave it a little stretch and filtered it. Recorded on a zoom h2.

Natural reverb hollow sound created with water sloshing back and forth underneath the princess wharf. The sound textures of the water changes with the tides. Recorded by a xy stereo omnidirectional microphone and zoomh5 recorder. Recorded on june 07th, 2015 under the princess wharf in auckland´s harbour, auckland, new zealand. Recorded at 16:10pm.

Rolling a movable wall forth and back. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2n with xy-capsulelow-cut: yes (80hz)normalized to -1dbfs. Location: leuphana universität lüneburg, lecture room hallway. Lat. 23. 885837699862005lon. 21. 796875. Date: 2013-12-03, 18:30hrecorded and edited by: ken erikli, milan redathis recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

I placed the recorder on the ledge of the doorway in my hall, this is me walking back and forth between two rooms. I have a reason for making this recording, these are the parts i would have deleted, so i cut them out and joined them together.

This is a very interesting sound to make. Luckely i knew exactly how to make this sound. I used leather jacket. I twisted the jacket back and forth moving it in front of the mic. The sound is almost identical to what i wanted. This was recorded at the open window institute sound booth in centurion, south africa.

Starts with two quick finger snaps before passing an iced coffee. Coffee back back and forth, on and off wooden desk shaking the plastic cup with ice, several repetitions. Recorded with a rode nt-usb mini (and a split cup jasmine milktea and house iced coffee from zero degrees in tempe, arizona. It was good as hell. ) recorded for the fiction podcast valence. Credit to hug house productions at https://hughouse. Productions greatly appreciated, but not mandatory. Enjoy! i love you!.

This is a whole lot of longsword-on-longsword sounds. I was specifically trying to get nice sounds for "winding", when two swords are pushed back and forth and around each other as opponents look for an opening. There are also some "binding" sounds, when the two swords first clash. Some of these binding noises did peak the mic. None of these binding noises were the swords hitting at full force - they are all weaker binds. Pick and choose the noises you like to build your sword fight foley.

Squeaking old office armchair. I have recorded this sound using my ipad 3, and software is dictaphone by alon software, version 1. 7. 6. Recording quality setting: normal. It was recorded at my office in mexico city, i was looking for a kind of similar sound at freesound. Org, and since i did not find anything related, i decided to make my own sound effect and my first upload to your web. I lowered the ipad in my hand under the chair and swayed back and forth three times to achieve the tone i considered efficient. Recorded: august 31, 2019.

Ou can hear the audible sounds of an airplane flying above my house going west towards the beach, the airplane getting closer and closer to my house then flying away aggressively. You can hear the graceful chirping of birds, sitting on the telephone line north of my house. You can hear the swift movement of the wind moving around and blowing on the leaves of the tree west of my house in the neighbor’s yard. You can hear the movement of me walking around back and forth in my yard listening to all the sounds trying to hear them clearly. You can hear a car drive down my street going east, the car was very heavy and going very slow.

In broekhuizen, near arcen, lies the old ferry named grubbenvorst, dying on the river maas. It has been replaced by a newer one. The old one lies rotting away some hundred metres away from its old trajectory. It was very windy that day and the carcass of the ship was mildly rocking back and forth resulting in this beautiful creaking. The occasional thud is the boat hitting the construction it is lying in. This recording was made with a zoom h2n on 4 channel mode. It was then further edited and processed using reaper. It was recorded on april 3rd 2018. The zoom was protected by a rycote windshield and my own cap as an extra windbreaker.

This was recorded by holding a small pcm recorder (zoom h1n) very close to an ipod 4th generation. The ipod was turned on and its hard drive tried to start up. You can hear the spin up of the motor and the hard drive head clicking back and forth. The hard drive fails to power up completely and eventually shuts down again. A 350 hz high pass filter was applied, in addition to audacity noise reduction, to get this clean motor noise from the original recording. The stereo file was then mixed to mono because the mic was slightly off center from the ipod, and the stereo provides no benefit. The hard drive in this ipod is a 1. 8" 40 gb toshiba hard drive, the ipod model is a1059. The microphone was held just 3 cm (1. 2 in) from the ipod. Recording settings were stereo 44. 1 khz at 16 bit (wav format). The file is the same except it's mono.

Td-3-tg recorded with zoom h-1. Td was performing slide through octaves with "slide" button pressed in program, and subsequent cs were played, in octave -1 and 0, and higher c in octave 0 and +1, back and forth. Program takes 7 16th notes and the space between notes takes 9 rests. Tempo of the td-3 was set to maximum and the volume control was set to high amount, to let zoom h-1 with rec level setting to 37, be driven up to -6db. Sound recorded in 96khz and 24bits. Trimmed and saved in flstudio edison, what made sound 32bit. No amplify, no normalisation. "tune" knob of td-3 was set to maximum as well as "cut off", "envelope" and "accent". "resonance" and "decay" was set to one o'clock. "waveform" swicth was set to square. No distortion. Zoom h-1 was plugged by a cable, td-3 output to line in. Cable was named vitalco - 1/8 inch trs to 1/4 ts, male to male, 3m.

A heartbeat sound i made, complete with some gurgling, blood-rushing sounds. Just uploaded a version without the gurgling, in case you prefer the way that sounds. To make this, i took a kick-drum sample and a snare-drum sample, and made a loop of kick-snare, kick-snare, kick-snare, over and over. After that, i eq'd out the more drum-like parts of each sample, added reverb to dull it, a chorus plugin and some compression to remove some of the drums' attack. . . Basically processed the hell out of them. To get the blood gurgling sound, i filled a water-bottle almost all the way full and turned it sideways, so i had a massive air-bubble floating around. I then tilted the bottle back and forth in front of my blue yeti usb condenser mic, so you could hear the air-bubble swishing. I had to be pretty gentle, because if you rock the horizontal bottle too much, the bubble moves too fast and makes a fake-sounding "gloomp. ". When i was happy with it, i mixed the heartbeat sound and the gurgling sounds so they'd work well together. Both the sounds were in mono, so i used a free plugin called wok ms-t on both of them to create a fake hard-panned stereo effect. I wanted it to sound like you'd been running, and were hearing the heartbeat in your ears. I think it turned out pretty cool. .

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie up and to the left to the border on the top which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. This time the mic is sitting in the cubby so i get a much clearer and louder sound. When i stretch the string across the top it has a fairly long sustain, so i can play 4 notes on a single pluck.

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie to the border on the left which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. The recording starts with me standing up from my chair. In the first part until 01:54 i am playing the string at maybe 30° from horizontal. It has a buzzy quality that reminds me of an african folk instrument i can't remember the name of. From 01:33 to 01:54 i'm trying to imitate a korean folk vibrato kind of thing. In the second part until 02:29 i am playing 45 to 60° from horizontal and it sounds like a full-bodied string bass with no buzz. In the last part beginning at 02:34 i am playing about 75° from horizontal across the top border of the cubbie on the left so it sounds buzzy and african again, and i'm just going crazy goofing around with a crazy bluesy rock sort of rhythm. There didn't seem to be any homemade 1-stringed wall-cubbie basses on this site so here is mine, have fun. I don't play it if mom is home because the living room is on the other side of the wall and she can't hear tv. Also my neighbor can probably hear it in the next apartment lol. Recorded with microsoft lifecam 3000.